Users Manual

第
3
页，总
8
页
handle blinks periodically to enter the connection state
；
4.3.2.3
After 3 to 5 seconds, the LED1 indicator on the handle is steady on, indicating that the connection is
successful
。
4.3.3
The cable connection
：
4.3.3.1
Choose from the icon below the main interface of SWITCH: Settings
→
Gamepad and sensor
→
Select
the wired connection option of Pro gamepad and make sure it is enabled
。
4.3.3.2
When the handle is off, connect the handle to the main machine with OTG converter head and data cable
。
4.3.3.3
The LED1 indicator blinks, and the handle is connected successfully
。
For SWITCH base: Connect handle to base with data cable
。
*
If the currently connected handle is P2, LED1+LED2 will be on at the same time
。
4.3.4
In Bluetooth connection mode, you can press the HOME button of the handset to connect to and wake up the
Switch
。
4.3.5
Connect to PC :(in PC mode, the key value is the same as the silkscreen key value)
4.3.5.1
Wired connection: mode is X-input key value handle
。
Connect the handle to the USB interface of PC directly with THE USB cable
。
The computer will prompt you to find new hardware and complete installation. The LED2 indicator on the handle
blinks (when the battery is full, the LED2 indicator is long on), indicating that the connection is successful
。
4.3.6 PC
Bluetooth connection
：
4.3.6.1
Long press the "reset" button of the handle for 3s to enter the pairing state, and 4 LED lights flash cyclically
to enter the connection state
。
4.3.6.2 Connect it on PC Bluetooth interface, and then use it on Steam platform。
4.4
Low power warning
：
4.4.1
The current connection mode indicator blinks slowly
。
4.4.2
Shutdown voltage: 3.3V
。
4.5
Charging tips
：
4.5.1
Charging: Insert the charging cable. The current mode indicator blinks slowly and is steady on when fully charged
。
4.5.2
Power off state charging: insert the charging cable, four LED lights flashing, full of four LED lights on
。
4.6
Controller sleep function
：
4.6.1
In the case of shutdown: long press the left rocker lever on the handle and press +L shoulder key to adjust the
sleep time up and down through the cross key
：
Sleep 5 minutes when the LED1 light at the same time
；