Users Manual

GamePad For Mobile Phone
Page 1 of 3
connection。
3.3 Low power indicator：
3.3.1 The power lamp flashes when the voltage is lower than 3.5v。
3.3.2 Shutdown voltage：3.3V 。
3.4 Charging tips：
3.4.1 The handle is connected to the charging state: the power supply lamp inserted into the charging line flashes
slowly, and the power supply lamp is always on。
3.4.2 Connectionless charging: the power supply lamp flashes slowly when plugged into the charging line, and the
power supply lamp is always on。
3.5 Sleep function of handle:
3.5.1 Press the "HOME" button to turn on the handle in the connected state, no signal is received for 60 seconds, and
sleep is entered。
34.5.2 After the handle is connected, no button or shaft action will enter into sleep for 5 minutes。
3.5.3 Press "Y+HOME" button in the pairing state, no signal is received for 60 seconds, and sleep is entered 。
5. Difficult to rule out：
4.1 When unable to boot, the built-in battery may be dead, please use the USB cable to charge the handle and then
boot。
4.2 When the handle unexpectedly freezes or drops, please keep a short distance from the device or reconnect。
4.3 Factory setting RESET: there is a small hole on the back of the handle, press down with a toothpick or other strip
hardware perforation, press the RESET button to restore the factory setting。
5. Attention：
5.1 Avoid strong vibration, do not disassemble, refit, repair。
5.2 Avoid storage in humid, high temperature, lampblack and other places。
5.3 Avoid water or other liquids entering the handle, which may affect the function of the handle。
5.4 Do not drop the handle into the fire or the river (sea) to avoid explosion or pollution。
5.5 The charging voltage of the product is usb4.5-5.5v dc power supply. Otherwise, it may not be charged or damage
the product。
5.6 If you have quality problems or Suggestions, please contact with the seller or after-sales staff。
6. Other parameters：
Search for current：10mA
Working current：8mA