Product Specs
Page 3 of 6
4. Function Description:
4.1 On/Off Function:
4.1.1 Power on: Press the [HOME] button for 1 second to display the power information before the
handle starts up. If the handle has been successfully paired with the host before, the handle will be
automatically connected back to the host after starting up. The mode of the controller after startup is
the mode before shutdown. For example, the Bluetooth mode before shutdown is also the Bluetooth
mode after startup.
4.1.2 Power off: Long press [HOME] for 3 seconds to power off the machine. Push the reset opening in
the small hole of the handle bottom shell with a small hard object
It can also be turned off.
4.2 Connection Method:
4.2.1 Connection of Android HID Bluetooth mode: Open the Bluetooth function of the device (such as
mobile phone or tablet), press the [X] + [HOME] button on the handle for 3 seconds to start the device,
and the No. 3 LED flashes quickly to enter the Bluetooth mode pairing state. Search the name PXN-P3
on the device, then click the connection, and the No. 3 LED will be bright after successful connection.
4.3 IOS Mode (XBOBONE Protocol) Only Supports ios 14.2 and later oss:
4.3.1 When the handle is turned off, short press the MODE key of the handle for 1 second. After the
power information is displayed, short press the MODE key +Y key of the handle for 3 seconds and the
LED1 light flashes for pairing.
4.3.2 Search for "controller" on the Bluetooth Setting screen of the IOS device. The connection is
successful and the LED1 indicator is always on.
4.5 Wired Connection Mode (PC xinput Mode) :
4.5.1 When the cable is connected, the PC XINPUT mode is used by default, and the connection is
successful. The LED1 indicator is always on.
4.5.2 Note: LED4 light indicates when wired connection; LED4 light blinds slowly when charging; LED4
light is steady on when fully charged.
5. Low voltage alarm and charging function:
5.1 When the battery voltage of the handle is 3.6V(± 0.3V), the No. 4 LED flashes indicating low power,
please charge in time.
5.2 When the battery voltage of the handle is lower than 3.5V(± 0.3V), the handle will automatically shut
down.
5.3. When charging, LED No. 4 flashes slowly, charging current: 300mA, LED No. 4 is steady on after full
charge.
5.4 The working static current is 21.9mA, and the search current is 22-24mA.
6. Sleep Patterns:
6.1 When the handle is connected successfully and there is no button or shaft action for 5 minutes, it will
enter the sleep mode.
6.2 When the handle is not connected, it will enter the sleep mode after 1 minute.
6.3 In sleep mode, the power consumption of the controller is 2uA. Short press the "HOME" button
during sleep to wake up.
7. Reset function: