Use Instructions

第2页，总4页
4. instructions：
4.1 The first step is to turn on the cable Settings in the host as shown below：
4.2 POWER ON/OFF ：
4.2.1 POWER ON： press the "HOME" button for 3 second to activate the controller, and the four LED
racing flashes once per second。
4.2.2 POWER OFF：Press the "HOME" button for 1 seconds to close the controller。
4.3 connect：
4.3.1 SWITCH host press and hold the "Y" button and then press the "HOME" button to start up the
pairing, four LED racing flashing,1 second 2 times, connected to the current LED light long
bright.(LED1 is bright if it is the first machine connection, and LED2 is bright if it is the second,
and so on)。
4.3.2 The android platform, press A and press HOME again. LED2+LED3 Quick flashing,
LED2+LED3 lights up after successful connection。
4.3.3 Connect the gamepad to the computer with the USB Micro data cable, which is the x-input key
value gamepad。
4.4 Low power prompt：
4.4.1 The current connection light flashes twice per second。
4.4.2 Shutdown voltage：3.2V 。
4.5 Charging tips：
4.5.1 Charging in the connected state of the handle: the light in the current mode of the charging line