Installation Guide

WPT App
“App Only’” restricts the EV700 to begin charging by mobile app only. Plug the EV700 into your EV, and the
touchscreen will prompt you to activate the charge on your mobile device.
RFID
“Card & App” restricts the EV700 to begin charging only by RFID card, or mobile app. Plug the EV700 into
your EV and the touchscreen will prompt you to activate the charge by swiping or using your mobile device.
Place the RFID card on the EV700 between the touch screen and the Wi-Fi symbol for at least 2 seconds to
activate/deactivate a charge session.
For more user information about network setup, current setting, and RFID card setup scan this QR
code!