Installation Guide

To change the operation settings to a different type of charge activation, select the gear at the
bottom left of the touch screen.
To protect your EV700’s settings, a passcode
must be entered before making any changes.
The default passcode is 123456. Enter these
numbers and touch the check mark at the bottom
right hand of the number pad.
Once you have entered the code the touchscreen
will display three properties available for modifying
- Current Settings, Binding Card, and Start Mode.
Select Start Mode to select your preferred
charging initiation style.
You may choose from three charge initiation
processes.
1. App Only
2. RFID & App
3. Automatic & App
Select the arrow at the bottom right of the
touchscreen once you have made a selection to
return to the home screen.