Installation Guide

Complete Installation
1. Hang the EV700 on the wall mounting bracket.
2 Reattach the device to the newly mounted bracket using the joiner
screw once again.
3. Extend the cable to its full length to remove any kinks or tension.
4. Drape the charging cable over the top of the charging station and dock the connector in its holster.
5. Restore power to the circuit at the electrical panel.
6. Plug the charging station into the outlet.
NOTE: Be mindful of the EV700 charging cable. Keep it positioned to prevent trampling, tripping, or damage.
(Example: Do not close a garage door or drive over the charging cable.)