Installation Guide

Location Planning
Prior to installation, verify your site has a sufficient electrical
capacity and suitable location for mounting.
1.
Be sure the area you have selected to mount your EV700 has sufficient space to accommodate the device.
See dimensions below.
Input Cable: 2 ft
Output Cable: 18 ft
(24 ft optional)
Depth: 3.5” inches
Width: 9.8” inches
Height: 14.9” inches
CAUTION: The circuit in use must be rated for 125% maximum load.
The EV700 is a continuous load device.
2. Be sure the property owner has selected a location for installation that allows enough cable to reach the car,
plus enough for remaining cable slack. Verify that a stud is available for mounting the charging device.
Notice: A plug-in install with a 50 amp is the only amperage allowed in Canada.