User's Manual

Operation Guide
Power on/off
Short press the Power/Set button to turn on the device.
Long press the Power/Set button to shut down.
Connect the probe to the device
Plug the connector of the probe into the probe jack off
the device. And the screen will display the current
temperature of the probe.
Switch the measurement unit
You can use the App to switch the temperature unit(C/F).
Notes:
1. When the measured temperature reaches the alert
value you set, the temperature alarm will start beeping
and the value display will keep flashing. Press button one
the device to stop the beeping.
2. The temperature alarm is on by default. You can turn
off the temperature alarm by APP.