User's Manual

8
2.1.2 The product rear panel
Button and Interface description (from right to left)
Reset: Under the electricity situation, press the button about five seconds, the router will
reboot, and after the reboot, the router will restore factory default. You can enter the router
use the default username and default password(username: admin, password: admin)
WAN Port: WAN port jack (RJ45), the port used to connect the Ethernet cable/xDSL
Modem/Cable Mode.
LAN Port: LAN jack (RJ45), used to connect LAN in hub, switch or installed network card
computer.
2.2 System Requirement
Internet service (Internet access through Ethernet cable or via xDSL/Cable Mode).
A modem with RJ45 port (use the Ethernet cable access directly do not need this equipment).
Every PC Ethernet connection device (wired internet card or wireless internet card and
Off
Blinking
Wi-Fi/Wi-Fi
Clone
Off
Blinking Slow
Blinking Quickly