User's Manual

50
Parameters Specification:
Start/End Port: Enter the start/end port number which ranges the External ports used to set
the server or Internet applications. Here in this example, enter 21.
IP Address: Enter the IP address of the PC where you want to set the applications. Here in
this example, enter 192.168.1.100.
Protocol: Specify the protocol required for the service utilizing the port(s). Select the protocol
(TCP/UDP/Both) for the application.
Enable to apply this function, Delete cancel this host configure.
Click Save to save your settings.
If your WAN IP address is 192.168.1.100 when accessing your FTP server from external network,
your friends only need to enter
ftp:// 192.168.1.100:21 in their browsers.
3.7.3 DMZ Settings
Set Steps
Click Expert Settings.
Select DMZ Settings.
DMZ Host Enable
Add a DMZ Host IP among LAN IP.