User's Manual
39
The WPS provides two methods: PBC and PIN to achieve the function it provides
PBC: Using routers and physical or logical button on a wireless device to connect WPS.
PIN: Using routers and PIN for WPS connection on a wireless device.
You have four methods to connect WPS:
1、 Use the PBC function on the WPS management page to connect:
① Choice “PBC”
② Click “Save”
③ The router's WPS led flashes two minutes, during this time, in the wireless client devices use
the WPS/PBC connect to your wireless signal.
2、 Using the router WPS button on the rear panel for the PBC connection
① Click “Enable”
② Click “Save”
③ Hold the router on the rear panel of the WPS button for 3 seconds, then let go
④ The router's WPS led flashes two minutes, During this time, In the wireless client devices use
the WPS/PBC connect to your wireless signal
3、 Using wireless network card 8bit PIN code
① Click “Enable”
② Select “PIN”
③ Enter “PIN code”
④ Click “Save”
⑤ The router's WPS led flashes two minutes, During this time, In the wireless client devices use
the WPS/PBC connect to your wireless signal
4、 Using the 8bit code on router sticker on the back.
① Click “Enable”
② Select “PIN”
③ Enter “PIN code”
④ The router WPS/PIN function opened, In the wireless client devices use the WPS/PIN mode,
enter 8bit PIN code connect to your wireless signal