User's Manual
34
Parameters Specification:
Wireless: wireless “Enable” or “Disable”.
SSID: It is the unique name of the wireless network and can be modified.
Broadcast (SSID): Select “Enable” to enable the router’ SSID to be scanned by wireless
devices. The default is enabled. If you disable it, the wireless devices must know the SSID for
communication.
BSSID: This is the MAC address of the device's wireless interface.
Channel: The currently used channel by the router. Select an effective channel of the
wireless network. The default is AutoSelect.
Channel Bandwidth: Select a proper channel bandwidth to enhance wireless performance.
This option is available only in 802.11b/g/n. Wireless speed in the channel bandwidth of 20/40
is 2 times in 20.
Extension Channel: This is used to ensure N speeds for 802.11n devices on the network.
This option is available only in 11b/g/n mixed mode with channel bandwidth of 20/40.
Note
The wireless Enable.
The SSID must be entered.