User's Manual
21
Here are two modes Router and AP:
Tips
The default mode is Router. You can change the operation mode on the quick setup page.
1) Router mode configure
Plug Internet cable to PW5002 WAN port.
Set steps:
① Select “Router”.
② Click “NEXT”.
③ You can select “Dynamic IP”, “Static IP”, “PPPOE” mode.
④ Click “NEXT” to configure the wireless information.
⑤ Click “NEXT”.
⑥ Click “Save” to confirm.
2) AP mode configure :
Set steps:
① Select “AP” mode and click “NEXT” button.
② Enter SSID, select channel
③ Select “Security Mode” and “WPA algorithms”
④ Enter the Pass Phrase.
⑤ Click “NEXT” enter the next page.
⑥ Click “Save” to confirm your settings.