User's Manual

1. When the camera does not detect any motion for 3 minutes, it will automatically turn off.
2. When an external power supply is connected, the energy-saving system will be disabled.
3. This feature can be turned on/off in the APP's setting page.
Insert the TF card
1. Open the cover of the TF card slot.
2. Insert a Class 10 or above TF card and the Max. storage is 128G. Please make sure to insert
the TF card in the right direction and cover the card slot.
3. Don’t remove the TF card while the camera is recording.
4. Please format the TF card when using it the first time. Format the TF card by quick pressing
the camera's ❸recording button 5 times or by using the APP.
Note: When using a new TF card, make sure to format it first or the camera might not be able to
detect the card (you will see the 2 lights are flashing alternately).
Format the TF card
1. By quick pressing the camera's button: stop recording first (you'll see the green light
remain on, it should not be flashing). Quick press the ❸recording button 5 times and the camera
will vibrate 5 times to format the card.
IMPORTANT: For 64GB / 128GB TF cards only format it by pressing the key button 5 times.
2. Using the APP: install the LOOKING CAM APP and connect your phone's WIFI to DB-1's
WIFI, then go to the APP's setting page and format the TF card.
Using the Camera
1. Before use, make sure that the camera is fully charged, and the TF card is inserted.
Note: The TF card must be formatted when using it with the camera for the first time.
2. Long press and hold the ❶power button 3 seconds to turn on the camera, and it will vibrate
once.