User's Manual

1. To power on / off: Press and hold the ❶power button for 3 seconds, and the camera will
vibrate.
2. To start / stop recording: Short press the ❸recording button ONCE.
3. To turn the WIFI on / off: (First, stop recording.) Short press the ❹WIFI button TWICE.
4. To format the TF card: (First, stop recording and turn off the WIFI.) Quick short press the ❸
recording button 5 times .
Note: If the camera can't detect or read the TF card, the 2 lights are flashing alternately.
IMPORTANT: For 64GB / 128GB TF cards only format it by pressing the key button 5 times.
Operations
Charge the Battery
1. Please charge the camera before use.
2. Please use the USB cable included to charge the camera.
3. While charging, the charging light (red light) will remain on, and it will automatically shut off at
full charge.
Note: Please don’t use the USB port of computer to charge the camera.
Check the battery status
Short press once the ❸recording button to stop recording first, and press twice the ❶power
button to check the battery status:
 Camera vibrates 3 times: battery power is more than 50%.
 Camera vibrates twice: battery power 30%-50%.
 Camera vibrates once: battery power is less than 30%.
Note: If the battery reaches 0%, the camera will automatically turn off.
Intelligent Energy-saving System