User's Manual

Using the Camera
1. Before use, make sure that the camera is fully charged, and the TF card is inserted.
Note: The TF card must be formatted when using it with the camera for the first time.
2. Long press and hold the ❶power button 3 seconds to turn on the camera, and it will vibrate
once.
3. Once the camera is turned on, the recording light (green light) remains on (meaning, it's not
recording), then it will automatically start recording. The green light will flash during recording.
To STOP recording, press the ❸recording button. The camera will vibrate once, and the
green light will remain on (not flashing). To START recording again, press the ❸recording
button and the camera will vibrate. The green light will start flashing indicating that the
camera is recording.
4. Turn on the camera's WIFI by pressing the ❹WIFI button TWICE. The blue WIFI light will
flash indicating that the camera's WIFI is turned on. If it is not connected to the phone's WIFI
within 1 minute, the camera's WIFI will automatically turn off. If the camera is connected to
the phone's WIFI, the blue light will remain on (it will not be flashing).
Note: If you turn off the camera without turning off the camera's WIFI, the next time the
camera is turned on, the WIFI will automatically be on.
5. Long press the ❶power button 3 seconds to turn off the camera, and it will vibrate twice.
6. If the camera can't detect a memory card or if there's an error in reading the card, the camera
will vibrate 3 times and 2 lights will flash alternately as a warning.
Using the Remote Control
1. The controller is optional. The wireless design can be flexibly installed and used according to
the operator’s need.
2. The camera and remote control will be automatically connected within 3 meters.