User's Manual

3. Go to your phone’s setting page , click the camera's WIFI and enter the password to
connect to it. The camera's WIFI name is DB1+SSID NO. and the password is 12345678
Note. Please DON’T change the WIFI name nor the password to avoid connection errors.
4. Once the camera's WIFI is connected to your phone's WIFI, open the LOOKING CAM APP
and follow the on screen instructions to add the camera to the APP.
5. If successful, you'll see the camera in the LOOKING CAM app. Click ACCESS CAMERA,
you can now use the app to control the camera, start / stop recording, take photos, view and
download your videos, and more.
6. When the camera is connected to the APP (blue light is ON but NOT flashing), all operation
(such as start / stop recording) should be done through the APP because the key button on
the camera will be disabled.
7. To change the camera's settings, go to the APP then press the Settings icon .
Note: The camera will STOP recording when you're in the setting page (the green light is on,
but NOT flashing). Remember to go back to the main page, so the camera can continue
recording (indicated by the flashing green light).
Common Questions
Q1: I can’t use 64G or 128G on my camera.
A: For 64GB / 128GB TF new cards, you have to format it by pressing the key button 5 times.
After the format is done, the camera can read the card and you can use it.
Q2: I can’t connect the APP.
A: (1) Please check if you’ve turned on your phone and camera's WIFI. Is the camera's blue light
flashing? If the blue light doesn't appear, it means that the camera's WIFI is not turned on. Stop
recording first, then turn on the WIFI by pressing the ❹WIFI button twice (the blue light will be
flashing). Find the camera in your phone's WIFI settings page and connect to the camera. (2)
Please check that you're connected to WIFI, and not Bluetooth. (3) Please check the flashing of
the lights, if you see 2 lights flashing alternately, this means that the camera can’t detect the