User's Manual

7
only 2.4Ghz networks. Please check that the Wi-Fi name is the name of
a 2.4Ghz Wi-Fi network. If not, please switch the mobile phone's Wi-Fi
network to a 2.4Ghz Wi-Fi network.
Next, please enter the Wi-Fi password and click Confirm.
Important Tips:
If
any window pops up to interrupt your operation during the
subsequent setup process, that means the mobile phone detected the
feeder by Bluetooth automatically. Please refer to the "
Add pet feeder
via Bluetooth
" chapter in page 10. Or click cancel to go on EZ mode.
Important Notice:
a. Please choose a 2.4Ghz Wi-Fi signal instead of a 5Ghz signal. The
feeder does not support 5Ghz Wi-Fi networks.
b. When entering the password, be aware that it is case sensitive.
c. Make sure the feeder is not far away from router and reboot router to
try again.
d. Please choose a Wi-Fi network with WPA or WPA2 encryption instead
of WEP encryption.
e. Make sure that MAC address filtering and wireless device isolation is
turned off on the wireless router.