User's Manual

11
Add pet feeder via AP mode
1. If the feeder fails to connect to the Wi-Fi network, the AP mode is plan
B for adding the feeder.
Choose Switch Pairing Mode when failed in normal mode or choose
AP mode manually in the adding process.
Check that the indicator LED is flashing in RED once every 3 seconds.
Then click Indicator is flashing slowly.
If the indicator is in another status, please long press the Wi-Fi button
for 3 seconds until you hear a beep to switch indicator's flashing status
to flashing rapidly. Then long press the Wi-Fi button again to switch
indicator's flashing status to flashing slowly.