User's Manual

8
f. The feeder may not support the Wi-Fi signal of the wireless repeater. If
the connection fails, try connecting to the wireless router.
5. Check whether the indicator LED is flashing RED 2 times per second.
If yes, then click Indicator is flashing rapidly to go to the next step.
If not, please long press the Wi-Fi Settings button for 3 seconds until
you hear a beep. Then the feeder's indicator LED will flash rapidly.
Indicator LED st
atus:
Flashing rapidly
in RED
Feeder is waiting for Wi-Fi network configuration;
it is in normal and auto scan mode.
Flashing slowly
in RED
Feeder is waiting for Wi-Fi network configuration;
it is in AP mode.
Always on in
RED
Feeder is configured for the Wi-Fi network and
trying to connect. If the connection fails, it will
always be red.
Always on in
BLUE
Feeder is connected to the Wi-Fi network. It can be
turned off in the settings.
Flashing in BLUE Feeder is feeding.
Always off
Feeder is only powered by battery or turned off
manually.
Flashing
rapidly
Long
press