User's Manual

5
4. Check whether the indicator LED is flashing RED 2 times per second.
If yes, then click Indicator is flashing rapidly to go to the next step.
If not, please long press the Wi-Fi Settings button for 3 seconds until
you hear a beep. Then the feeder's indicator LED will flash rapidly.
Indicator LED status:
Flashing rapidly in RED Feeder is waiting for Wi-Fi network
configuration; it is in normal and auto scan
mode.
Flashing slowly in RED Feeder is waiting for Wi-Fi network
configuration; it is in AP mode.
Always on in RED Feeder is configured for the Wi-Fi network
and trying to connect. If the connection
fails, it will always be red.
Always on in BLUE Feeder is connected to the Wi-Fi network. It
can be turned off in the settings.
Flashing in BLUE Feeder is feeding.
Flashing
rapidly
Long
press