User's Manual

OPT button on your remote control or repeatedly pressing the MODE button on the
soundbar control panel until OPT is displayed on the LED display. Ensure Optical
SPDIF is selected as the TV’s audio output, then adjust the volume of the soundbar
using the Volume up and Volume down buttons on the remote control or soundbar
control panel.
• Bluetooth: Press the BT button on the remote control or repeatedly pressing the
MODE button on the soundbar control panel until bt is shown on the LED display.
The LED display will flash to indicate that the soundbar is in Bluetooth pairing mode.
Ensure that the device you wish to connect is also in pairing mode and search for
HD-079 in its device list. When the two devices are paired, the LED display on the
soundbar will stop flashing and remain constant. (The soundbar will now
automatically re-pair with this device whenever it is within range and has Bluetooth
turned on.)
• USB media mode: The soundbar is compatible with USB flash drives of up to 32GB
in size and can play MP3 and WAV audio files directly. Simply insert a compatible
drive into the USB port on the back of the soundbar and the unit will automatically
switch to USB mode and play the first compatible track.
USB repeat mode (also accessed via the remote control) enables single track repeat
(ONE), all track repeat (ALL)
The media player also has a memory function that will recall and continue from the
last-played point when a USB flash drive that has previously been used with the
soundbar is reinserted.