Instruction Manual

14
Using TF Card And USB Playback DMP (Media Player)
Install USB / TF device:
1. Turn off the unit before install USB / TF card.
2. Install the USB device into USB port.
3. After connect, press the button to turn on unit and the power indicator light
GREEN.
4. Press the / SOURCE button to enter and use buttons to search the DMP
mode.
5. After selection, use buttons to search the PHOTO / MUSIC / MOVIE icon and
press the button to enter. If necessary, use the button to select TF card or
USB and press the button to enter.
6. Use buttons to search the correct file and press the button to preview
playback file and press the / EXIT button or button of remote to start playback.
7. Press button to fast search forward and rewind.
8. Press button to search next or previous file.
9. During playback, press the button to pause and press again to resume.
NOTE: Remove USB / TF device, press the button to turn off power FIRST.
Sub
-
Menu on Photo screen
1. When photo playback, press
the button and more
function screen show on lower
(figure 1).
2. Use the button to select
icon and press the button
to play special function.
Figure 1.
Sub
-
Menu on
Music
screen
1. When music playback, press
the button and more
function screen show on lower
(figure 2).
2. Use the button to select
icon and press the button
to play special function.
Figure 2.
Sub
-
Menu on
Movie
screen
1. When movie playback, press
the
button and more
Figure 3.