Instruction Manual

12
Connect VGA Show The Image On Projector Screen
Follow below picture to connect VGA cable and device.
1. Turn off the unit before connect VGA cable.
2. Press the button to turn off power of your projector before connection.
3. After connect, press the button to turn on unit and power indicator will light
GREEN
4. Press the / SOURCE button to select VGA mode and the video of VGA device
will show on projector screen
5. Press the button to turn off unit power.
Please refer to the following table to adjust the output signal from computer
Type Resolution Frequency Field Frequency
PC
VGA 640x480
31.5 60
34.7 70
37.9 72
37.5 75
SVGA 800x600
31.4 50
35.1 56
37.9 60
46.6 70
48.1 72