Product Instructions

device, and place the toothbrush handle on the charger, and the display of the toothbrush will indicate the charging status.
7. Device Restart
Restart the device when the device is stuck or not working properly.
Toothbrush restart: Press the brush head and turn on the toothbrush to charge while keeping the brush head pressed. After powering on, keep the brush head pressed for more than 5
seconds.
Use Steps
1. Install the brush head
Align the tooth brush head, make the bristles in the same direction as the front of the handle, push the brush head down onto the metal shaft until there is a small gap of ≈ 0.118 inch
left.
Note: Gap between the brush head and the handle is to facilitate the cleaning of toothpaste stains and other residues and prevent accumulation. This gap does not affect the normal use of
the toothbrush.
2. Wet the brush head and squeeze an appropriate amount of toothpaste on the bristles.
3. Wake up the toothbrush, put the brush head into your mouth, maintain contact between the brush head and your teeth, and apply appropriate pressure. When it
detects pressure, the toothbrush enters cleaning mode and shows the cleaning status on the screen. The toothbrush will vibrate slowly when you move the brush
head away from your teeth, and stop vibrating when it continuously detects no pressure.
*If the screen does not show the cleaning status, you can manually press against the front of the brush head shaft (pushing it backwards) to activate the device, and
then continue brushing your teeth.
4. When you finish brushing, view the overall cleaning data on the screen to see if any zones need a second cleaning.
*The toothbrush maps the inner and outer sides of your teeth into 12 zones, and shows the missed zones in yellow and the thoroughly-cleaned zones in white.
Daily Maintenance
1. Rinse the brush head and bristles after each brushing.Remove the brush head and rinse the metal shaft with warm water, and make sure that all residues of the
toothpaste are removed, and rinse the brush head connection with warm water at least once a week.
2. Wipe the entire surface of the toothbrush handle with a damp cloth.
Store
If you will not use this product for a long time, please fully charge the toothbrush handle, unplug it from the power outlet, clean and store in a cool and dry place away
from direct sunlight.
Specification Parameter
Product name: planck O2 Smart Electric Toothbrush
Model: planck O2
Waterproof grade: IPX7
Rated voltage: 7.4V
Rated power: 3.5W
Rated input: 5V/0.7A