User's Manual

ManualsBrandsSHEN ZHEN CL LIGHTING TECHNOLOGY ManualsElectrical Equipmentsmart RGBIC light strip kit

smart RGBIC light strip kit

User manual

WIFI+IR control

Various dream color modes

include running water, rainbow etc.

Voice and intelligent speaker control

DIY seven color changing and dimming

Time switch

Remote controllable

after connect to internet

1: Search the APP- “SMART LIFE”from Apple store or Google Play.

2: Scan the QR code from the label or user manual.

Open the APP - “Smart Life”, sign up for a new account or log in with an existing account.

1.Preparation jobs: Power on the LED strip and enter the home of APP, please make

sure your mobile and the smart kits are connected to the same WIFI.

2.Connect the controller：

Solution 1) : After powering on the strip, turn on and off 3 times(or long press the switch

button for over 5 seconds), the strip will go into a status of quick flashing.

Find the “+”(in the corresponding room of the APP) to add devices. If your

mobile have already turned on bluetooth before connecting the LED strip,

then no need to turn on bluetooth again, the APP will connect to the LED

strip automatically. If your mobile didn’t turn on bluetooh before connecting

the LED strip, the APP will pop up an interface with tips to ask you to turn

on bluetooth. Then please choose “Allow”, then the bluetooth function

of your mobile will be turned on.After that, the APP will pop up tips with info

of the LED strips, then choose “Go to add”. Will go into an interface of

bluetooth device, choose

the “+” and go into next interface(Enter Wi-Fi password). Input the

password of the WIFI and choose “Confirm”, then it will go into status

of “Connecting......”, you will

need to await for your mobile to pairing with the controller at this step.

Choose “Done” when it shows “Added successfully”, then go into operation

modes. (If solution 1 is not suitable with your devices, please refer

to solution 2)

Solution 2) : After powering on the strip, turn on and off 3 times(or long press the switch

button for over 5 seconds), the strip will go into a status of quick flashing.

Find the “+”(in the corresponding room of the APP) into interface of “Add

manually”. Then choose “lighting” to choose the correct smart devices and

go into interface of “Select 2.4 GHz Wi-Fi Network and enter password”.

Enter the Wi-Fi password, then choose “Next” and waiting until pairing

success(make sure your mobile and the smart devices are in the same

Wi-Fi networks). Then go into the interface of “Scanning devices”, after

scanning success and choose “Next”, it will pop up interface of “add

successfully” and choose “Done” to go into the operation modes.

3.When connecting with the power supply, the led strip not flash. Please press the

function button for over 5 seconds, then the light flash, enter into the APP and choose

to add all the device in the corresponding room in the APP. Enter into the interface of

adding lighting device and match the LED strip.

In the Smart Life APP: Find more service in "Me" menu, and find “More service”,

you’ll find the third-party access service (Alexa/ Google Assistant/Tecent Xiaowei/

DuerOS/Dingdong etc) , select the service you need. Connect to the third-party

service device according to the operation guide.

Please contact customer service for any update of product or APP.

Third party control

※The APP interface, please subject to the latest

version.

Step 3)

Interface introduction

APP connection

Wiring diagram

Product features

Paramters

Product dimension

Download APP

Music sync

1.APP preset scene types include: Quiet, Active and Romantic.

①The quiet scenes include:Film, Dating, sunset and Christmas.

②The active scenes include: Romantic, Colorful, Dynamic and Dream

③The romantic scenes include: Rainbow, Flowing water.

① ② ③

2.Music modes

① Rhythm ② Roll ③ Energy ④ Spectrum

The APP could DIY various customized scenes.(The

customized scenes will appear in the UI of scenes after setting.)

IR Music remote controller manual

Product introduction:

The 19 keys IR remote control could realize

various dreamcolor modes include running water

and music modes etc.

Parameters:

Power supply: 3V button cell

Control distance: 5-8 meters in open area

Instructions of remote control:

Please remove the PVC insulation sheet from the end of the remote control

before using. Please set the APP internet connection as priority when the light is blinking.

W R G B

Features

ON/OFF

Speed/sensitivity

Music mode pause/beat

Dynamic mode switching

Music mode

Automatic mode

Brightness +/-

Static color switching

action Remote control buttons

Short Press

Model No.

STWSC6-43T2

STWSC6-43T3

STWSC6-43T5

RGB

Color

Input voltage

12/24Vdc

Power

Max.48W

......

Other optional plugs

Installation

Attentions

1. Do not put any metal around the controller, which could blocked WiFi signal.

2. Ensure the power supply and controller are connected correctly.

3. The power supply output voltage should be same as LED strip working voltage.

4. Do not cover anything on the surface of power supply, controller and LED strip.

5. Ensure the connection is correct before powering.

1.Use the power adapter with DC12/24V of output voltage only.

2.Install the controller correctly, use 3M tape to fix it.

3.Please unfold the LED strip to avoid the overheat issues. Please connect the

cables of LED strip with the right position on the controller. Test the APP to check

if it can control the LED strip correctly. If everything goes well, go to next step.

4.Check and ensure the power supply, controller and LED strip are connected correctly.

Product functions diagram

1:IR recevier

2: DC12/24V input connection port.

3:Output connection port to connect to LED strip.

4.Function button:Turn ON

Turn OFF(two short click)

Modes Change

Long press the button for over 5 seconds to reset

or network pairing.

71.2 mm

④②

③

①

③

④②

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by

manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated

with minimum distance 20cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any

other antenna or transmitter.

Android supports at least 5.0 system, iOS supports at least 10.0 system

(App versions below 3.20 are iOS ≥ 9.0. Only suitable for mobile phones,

not for tablets and other devices), Bluetooth devices ≥ V5.0.