Specifications

Shenzhen Bigtree Technology Co.,Ltd

Three: Assembly

3.1 Machine Assembly

Please make sure the machine is not damaged during shipping. If there is

any problem, contact the seller as soon as possible. If the machine is in

good condition, and no tools or supplies are missing, feel free to start

installing your printer.

Step one: place the aluminum extrusion (2) such that they are facing

toward the front of the printer (1), use the bolts from bag A1 (black

M5*25 bolt) (3) to fasten both aluminum extrusions.

Step two: check that the aluminum extrusion (1) is secured, make sure (2)

and (3) are orientated correctly according to the picture.

Step three: twist couplings of both z-axis steppers at the same time so

that the x-axis rail can slide in smoothly.

Step four: make sure the aluminum extrusion is facing the front (similar to

step one), use the hardware in bag A1 (black M5*25 bolts, M5 washers)

to secure the top aluminum extrusion.