Specifications

Shenzhen Bigtree Technology Co.,Ltd

Notes:

Double check your connection.

Use a scale/ruler to make sure (1) and (2) are at the same height.

Congratulations! The installation is finished. Start your 3D printing now!

Four: User interface

Recommend to touch screen by nail/stylus

4.1 Auto Leveling

Plug in the power cord (1), remove the film pressure sensor, one end

connects to the nozzle and the other connect to the side of the unit as

shown in the picture (2); click “more” on the main interface, press “auto

leveling” and confirm, and you will see “leveling is completed” after the

print bed is leveled. Note: make sure your print environment is less than

45 degree Celsius so that the film pressure sensor can work properly,

you don’t need to redo auto leveling for future print.