Owner's Manual

8
Wet Sounds WS-MC1 Media Center System Owner’s Manual
WS-MC-1 Basic Controls
BLUETOOTH
®
AUDIO OPERATION Follow the instructions above to connect the
desired Bluetooth
®
device to the MC-1. Press SOURCE, then BT AUDIO. PLAY/PAUSE,
Forward/Reverse Track, Shufe & Repeat are all available via the buttons below
the display (6). Press the MENU button to search for Playlists, Artists, Albums, Genres,
Songs, Composers, Audiobooks, or Podcasts. The MC-1 can display either ALL or will
search alphabetically in each category.
AUXILIARY INPUT OPERATION Press SOURCE, then AUX to allow access to the 3.5mm
auxiliary input on the MC-BB. This option can be used to allow connection of a
variety of audio sources.
PANDORA
®
This feature allows the control of the Pandora
®
application from the
MC-1 directly (Android users are limited to Bluetooth
®
connection only, while iOS
users can use both USB and Bluetooth
®
). The Pandora
®
app will need to be started
on your device rst, then press SOURCE, then PANDORA
®
on the MC-1.
FEATURES “Looking Glass“ Allows all the stations you have created on Pandora
®
to be displayed. Rotate the MCK to scroll through, then press to select.
> II This button pauses the Pandora
®
stream. Pressing it again will restart the
Pandora
®
stream.
>> I This button forwards to the next song on the Pandora
®
Stream.
**> Allows access to more features. The “Bookmark”, “Thumbs Up” and “Thumbs
Down” buttons help you customize your Pandora
®
experience.
LIGHTING The MC-1 allows the control of up to 4 Zones of RGB LED lighting when
used with the optional WS-4Z-RGB-BB Controller. You must have this accessory to be
able to control RGB LEDs with the MC-1. For more details on the WS-4Z-RGB-BB, visit
www.wetsounds.com.
OPERATION Press SOURCE (2X), then LIGHTING to access the lighting control screen.
Select which zone you want to control by using the buttons below the display (6),
then rotate the MCK to select the feature you want to adjust, then press the MCK to
select it.
POWER MODE Selecting this option enables access to the Power/Mode feature. This
feature allows you to quickly turn on/off either the zone selected, or all zones. The
MODE feature allows the choice of a variety of LED effects:
• Solid: RGBs remain continuously lit at one selected color.
• Fade: RGBs fade from zero illumination to full illumination based on the
rate chosen.
• Music: RGBs react to the beat of the music - Please make sure that the AUX
out (3.5mm) on the MC-BB is connected to the music input of the WS-4Z-RGB-BB
to make this feature function.
• Strobe: RGBs ash continuously.
• Change: RGBs alternate colors
Each zone will display the Power & Mode status on the main Lighting Display screen.
For instance, if Zone 1 is showing “ON/Change” that indicates that Zone 1 is turned
on and will be alternating RGB colors.