User's Manual

5
IR Headphone use manualIR Headphone use manual
Receive Window
battery
20
4
3
Adjustable
Headphone slider
1
1. Power switch manual switch on the headset. When the headset is turned on,
the power indicator goes on.
2. IR channel selection (A-B-band)
3. Indicator - When the headset is turned on, the power indicator goes on.
4. Adjust the headset volume control the volume level.
2
Note: The product will be slightly different for different batches,
this picture is for reference only, to kind of quasi
Wired headset use manual
1
2
3
After you connect well the power wire, press the [POWER] button on the screen or
touch any area of the panel to power on the screen .When you touch any area of
the panel, the screen will display 1.0,When you select [MENU] on the panel,
the screen will display as 1.1
TOUCH MENU
IR Headphone use manualIR Headphone use manual
4infrared headphones are equipped with an integrated display on the front of the infrared (IR)
transmitter. Send the driver side of the displayChannel is the "A", passenger side of the monitor to
send channel is "B". Listen to the audio playback display, open the headset, Select the
corresponding display is watching the audio channel. Note: Open the headset before, certainly not to
the volume control on headphones System to its lowest setting.
Note:
1. Please mark the correct installation of the power slot 3A (AAA) battery (long-
term when not in use, remove the battery the headset).
2. Open the headset, the head of the child or adult-sized headphones to adjust the
slider to the best size.
3. When the headset does not receive the signal source, about 500 seconds, will
automatically switch off the headset.
4 When the power LED does not light, check the battery is placed correctly or replace the battery.
4 Make sure that the receive window to receive the IR signal emitted.
4 When using an infrared headset, speaker volume adjusted to the minimum recommended (to
protect your hearing, do not long Use headphones).
4 Connect the wired headset, wired headset cable plugs into
headphone jack,
Do not listen to the volume under long-term, good product dust,
moisture, dirt and so on.
4 to avoid contact with sharp objects and high temperature to avoid
damage to the product structure and function.
Note:
Over headphones specifications for reference only, please
prevail in kind, standard headphones are not attachments.
(Note: The product will be slightly different
due to batch differences This image is for
reference only, quasi-kind)
MENU
EXIT
9 7 < 4
; 8 :
Back
Exit
Main Menu
Audio Video
Source Setup
Disc Menu DVD Functions
1.0 1.1
(NOTE:the IR channel of monitor1 is A,
and the monitor2 is B)
When you press [Audio] on the panel, the screen will display as
below and you can adjust two monitor s parameters at your willing
Back
Exit
Audio
FM Control
-This Screen+
FM Source
-Other Screen+
IR Headphone
-Channel A+
FM Radio Out
- off +
1.2
FM Control
-This Screen+
FM Control have 2 optional:
-Other Screen+;-This Screen+
IR Headphone
-Channel A+
IR Headphone have 3 optional:
-A+; -B+; -OFF+;
FM Source
-Other Screen+
(NOTE:when display this screen,
FM source;FM Radio out no display)
FM Source have 3 optional:
-Other Screen+;-This Screen+;
-EXT.INPUT+
FM Radio Out
- off +
FM Radio out have 9 optional:
88.5MHZ-88.7MHZ-88.9MHZ-
89.1MHZ-89.3MHZ-89.5MHZ-
89.7MHZ-89.9MHZ-OFF