User's Manual

Pause / Stop / Play
When a disc is playing press the PAUSE button on the remote control or on the
Multimedia player to pause the session. Press the PLAY button on the remote
control or the Multimedia player to resume playing the disc.
Press the STOP button once on the remote control or The Multimedia player to
stop playing a disc. The unit will memorize the position on the disk and will continue to
play from that position if the PLAY button on the remote control or The Multimedia
player is pressed.
Press STOP STOP twice to completely stop playing a disc. When the PLAY button
on the remote control or the Multimedia player is pressed hereafter, the unit will not
resume playing from the position the disc was interrupted at. Note: The Disc continues to
spin for approximately 4 minutes after pressing the stop button.
Select menu items
In either the disc menu or the setup menu:
(1) Press the / / / arrow buttons to move between selectable items.
(2) Press the PLAY button to confirm and/or execute a selection
When the DVD disc contains an on-disc menu, you can display and access this menu
by pressing either the MENU button on the Remote Control. (Note: PBC must be turned
on.)
Select a specific on-disc Menu section
(1) Press the MENU button. You will now see the menu of the DVD (if available) and
the selection choices in this menu.
(2) Press one of the arrow buttons to scroll
through the displayed (sub) menu items. Press PLAY to confirm the selection.
(3) Alternatively, use the Number buttons to make a selection. For example: To
select the 13th song, press 10+ then 3
Load an Audio disc, upon reading the disc, you can select/play songs via the number
buttons. If the track number is lower than 10, press a number button 0 9 to select the
desired track. For example: to select the 8th track, press number button 8. To select track
numbers beyond 10, first press the 10+ button, followed by a single digit number button
0 9 For example: To select the 12th song, press button 10+ and then press button 2.
Audio CD discs, track selection
Page 8 of 25 pages
ADVANCED OPERATION ADVANCED OPERATION
Pause / Stop / Play
When a disc is playing press the PAUSE button on the remote control or on the
Multimedia player to pause the session. Press the PLAY button on the remote
control or the Multimedia player to resume playing the disc.
Press the STOP button once on the remote control or The Multimedia player to
stop playing a disc. The unit will memorize the position on the disk and will continue to
play from that position if the PLAY button on the remote control or The Multimedia
player is pressed.
Press STOP STOP twice to completely stop playing a disc. When the PLAY button
on the remote control or the Multimedia player is pressed hereafter, the unit will not
resume playing from the position the disc was interrupted at. Note: The Disc continues to
spin for approximately 4 minutes after pressing the stop button.
Select menu items
In either the disc menu or the setup menu:
(1) Press the / / / arrow buttons to move between selectable items.
(2) Press the PLAY button to confirm and/or execute a selection
When the DVD disc contains an on-disc menu, you can display and access this menu
by pressing either the MENU button on the Remote Control. (Note: PBC must be turned
on.)
Select a specific on-disc Menu section
(1) Press the MENU button. You will now see the menu of the DVD (if available) and
the selection choices in this menu.
(2) Press one of the arrow buttons to scroll
through the displayed (sub) menu items. Press PLAY to confirm the selection.
(3) Alternatively, use the Number buttons to make a selection. For example: To
select the 13th song, press 10+ then 3
Load an Audio disc, upon reading the disc, you can select/play songs via the number
buttons. If the track number is lower than 10, press a number button 0 9 to select the
desired track. For example: to select the 8th track, press number button 8. To select track
numbers beyond 10, first press the 10+ button, followed by a single digit number button
0 9 For example: To select the 12th song, press button 10+ and then press button 2.
Audio CD discs, track selection
Page 8 of 25 pages
ADVANCED OPERATION ADVANCED OPERATION
Pause / Stop / Play
When a disc is playing press the PAUSE button on the remote control or on the
Multimedia player to pause the session. Press the PLAY button on the remote
control or the Multimedia player to resume playing the disc.
Press the STOP button once on the remote control or The Multimedia player to
stop playing a disc. The unit will memorize the position on the disk and will continue to
play from that position if the PLAY button on the remote control or The Multimedia
player is pressed.
Press STOP STOP twice to completely stop playing a disc. When the PLAY button
on the remote control or the Multimedia player is pressed hereafter, the unit will not
resume playing from the position the disc was interrupted at. Note: The Disc continues to
spin for approximately 4 minutes after pressing the stop button.
Select menu items
In either the disc menu or the setup menu:
(1) Press the / / / arrow buttons to move between selectable items.
(2) Press the PLAY button to confirm and/or execute a selection
When the DVD disc contains an on-disc menu, you can display and access this menu
by pressing either the MENU button on the Remote Control. (Note: PBC must be turned
on.)
Select a specific on-disc Menu section
(1) Press the MENU button. You will now see the menu of the DVD (if available) and
the selection choices in this menu.
(2) Press one of the arrow buttons to scroll
through the displayed (sub) menu items. Press PLAY to confirm the selection.
(3) Alternatively, use the Number buttons to make a selection. For example: To
select the 13th song, press 10+ then 3
Load an Audio disc, upon reading the disc, you can select/play songs via the number
buttons. If the track number is lower than 10, press a number button 0 9 to select the
desired track. For example: to select the 8th track, press number button 8. To select track
numbers beyond 10, first press the 10+ button, followed by a single digit number button
0 9 For example: To select the 12th song, press button 10+ and then press button 2.
Audio CD discs, track selection
Page 8 of 25 pages
ADVANCED OPERATION ADVANCED OPERATION
3D PROCESSING PAGE3D PROCESSING PAGE
PRO LOGIC II PRO LOGIC II
REVERB MODE OFFREVERB MODE OFF
REVERB MODEREVERB MODE
OFFOFF
CONCERTCONCERT
LIVING ROOMLIVING ROOM
HALLHALL
BATHROOMBATHROOM
CAVECA VE
ARENAARENA
CHURCHCHURCH
Select 3D PROCESSING to set up your
preferred 3D mode. Press PLAY to enter
this selection and to set up your preferred
Audio mode for a better surround effect.
Press PLAY/SAVE or the RIGHT arrow
to enter this selection.
Pause / Stop / Play
When a disc is playing press the PAUSE button on the remote control or on the
Multimedia player to pause the session. Press the PLAY button on the remote
control or the Multimedia player to resume playing the disc.
Press the STOP button once on the remote control or The Multimedia player to
stop playing a disc. The unit will memorize the position on the disk and will continue to
play from that position if the PLAY button on the remote control or The Multimedia
player is pressed.
Press STOP STOP twice to completely stop playing a disc. When the PLAY button
on the remote control or the Multimedia player is pressed hereafter, the unit will not
resume playing from the position the disc was interrupted at. Note: The Disc continues to
spin for approximately 4 minutes after pressing the stop button.
Select menu items
In either the disc menu or the setup menu:
(1) Press the / / / arrow buttons to move between selectable items.
(2) Press the PLAY button to confirm and/or execute a selection
When the DVD disc contains an on-disc menu, you can display and access this menu
by pressing either the MENU button on the Remote Control. (Note: PBC must be turned
on.)
Select a specific on-disc Menu section
(1) Press the MENU button. You will now see the menu of the DVD (if available) and
the selection choices in this menu.
(2) Press one of the arrow buttons to scroll
through the displayed (sub) menu items. Press PLAY to confirm the selection.
(3) Alternatively, use the Number buttons to make a selection. For example: To
select the 13th song, press 10+ then 3
Load an Audio disc, upon reading the disc, you can select/play songs via the number
buttons. If the track number is lower than 10, press a number button 0 9 to select the
desired track. For example: to select the 8th track, press number button 8. To select track
numbers beyond 10, first press the 10+ button, followed by a single digit number button
0 9 For example: To select the 12th song, press button 10+ and then press button 2.
Audio CD discs, track selection
Page 8 of 25 pages
ADVANCED OPERATION ADVANCED OPERATION
3D PROCESSING PAGE3D PROCESSING PAGE
PRO LOGIC II PRO LOGIC II
REVERB MODE OFFREVERB MODE OFF
REVERB MODEREVERB MODE
OFFOFF
CONCERTCONCERT
LIVING ROOMLIVING ROOM
HALLHALL
BATHROOMBATHROOM
CAVECA VE
ARENAARENA
CHURCHCHURCH
Select 3D PROCESSING to set up your
preferred 3D mode. Press PLAY to enter
this selection and to set up your preferred
Audio mode for a better surround effect.
Press PLAY/SAVE or the RIGHT arrow
to enter this selection.
VIDEO SETUP PAGEVIDEO SETUP PAGE
GOTO VIDEO SETUP PAGEGOTO VIDEO SETUP PAGE
COLOR SETTINGCOLOR SETTING
Select this menu item to set up your Video
Quality modes. Press PLAY to enter this
selection.
Pause / Stop / Play
When a disc is playing press the PAUSE button on the remote control or on the
Multimedia player to pause the session. Press the PLAY button on the remote
control or the Multimedia player to resume playing the disc.
Press the STOP button once on the remote control or The Multimedia player to
stop playing a disc. The unit will memorize the position on the disk and will continue to
play from that position if the PLAY button on the remote control or The Multimedia
player is pressed.
Press STOP STOP twice to completely stop playing a disc. When the PLAY button
on the remote control or the Multimedia player is pressed hereafter, the unit will not
resume playing from the position the disc was interrupted at. Note: The Disc continues to
spin for approximately 4 minutes after pressing the stop button.
Select menu items
In either the disc menu or the setup menu:
(1) Press the / / / arrow buttons to move between selectable items.
(2) Press the PLAY button to confirm and/or execute a selection
When the DVD disc contains an on-disc menu, you can display and access this menu
by pressing either the MENU button on the Remote Control. (Note: PBC must be turned
on.)
Select a specific on-disc Menu section
(1) Press the MENU button. You will now see the menu of the DVD (if available) and
the selection choices in this menu.
(2) Press one of the arrow buttons to scroll
through the displayed (sub) menu items. Press PLAY to confirm the selection.
(3) Alternatively, use the Number buttons to make a selection. For example: To
select the 13th song, press 10+ then 3
Load an Audio disc, upon reading the disc, you can select/play songs via the number
buttons. If the track number is lower than 10, press a number button 0 9 to select the
desired track. For example: to select the 8th track, press number button 8. To select track
numbers beyond 10, first press the 10+ button, followed by a single digit number button
0 9 For example: To select the 12th song, press button 10+ and then press button 2.
Audio CD discs, track selection
Page 8 of 25 pages
ADVANCED OPERATION ADVANCED OPERATION
3D PROCESSING PAGE3D PROCESSING PAGE
PRO LOGIC II PRO LOGIC II
REVERB MODE OFFREVERB MODE OFF
REVERB MODEREVERB MODE
OFFOFF
CONCERTCONCERT
LIVING ROOMLIVING ROOM
HALLHALL
BATHROOMBATHROOM
CAVECA VE
ARENAARENA
CHURCHCHURCH
Select 3D PROCESSING to set up your
preferred 3D mode. Press PLAY to enter
this selection and to set up your preferred
Audio mode for a better surround effect.
Press PLAY/SAVE or the RIGHT arrow
to enter this selection.
VIDEO SETUP PAGEVIDEO SETUP PAGE
GOTO VIDEO SETUP PAGEGOTO VIDEO SETUP PAGE
COLOR SETTINGCOLOR SETTING
Select this menu item to set up your Video
Quality modes. Press PLAY to enter this
selection.
HDCD SETUP PAGEHDCD SETUP PAGE
FILTER 1X FILTER 1X
FILTERFILTER
OFFOFF
1X1X
2X2X
Select HDCD to set up your preferred
Audio mode for HDCD. Press PLAY to
enter this selection and to set up your
preferred filter mode for HDCD
(default is 1X).
1x = 48K Sampling, 2x = 96K Sampling
COLOR SETTING SETUPCOLOR SETTING SETUP
SHARPNESSSHARPNESS
SHARPNESS MIOSHARPNESS MIO
BRIGHTNESS 00BRIGHTNESS 00
CONTRAST 00CONTRAST 00
GAMMA NONEGAMMA NONE
HUE 00HUE 00
SATURATION 00SATURATION 00
LUMA DELAY 1 T LUMA DELAY 1 T
HIGHHIGH
MEDIUMMEDIUM
LOWLOW
You can set the picture sharpness to these
choices. If a video image is light, select the
LOW option. If a video image is dark, select
the option.HIGH
Page 17 of 25 pages