User's Manual
4/11
LED Indicator
Booster working conditions
LED LIGHT Continuous GREEN @normal；
Twinkly GREEN @input signals may be not enough；
Continuous YELLOW @ stronger input signals, AGC is working；
Twinkly YELLOW@ self–oscillation happen ,AGC is working.
Continuous RED@ power supply is shut down；
Twinkly RED@ self–oscillation happen but power supply is NOT shut down.
②Power supply jack: The booster uses a power input range of DC 5-12V.
③INDOOR and OUTDOOR port：The two ports are used to connect outdoor and indoor
antennas.
(3)Antennas and Cables:
In order to use the Booster, you still need the corresponding indoor antenna 1pcs,
outdoor antenna 1pcs, outdoor cable 1pcs and indoor cable 1pcs.
Antennas and cables kitting information are as follows
Name Model Gain/Loss photo
Indoor Antenna
Rubber Antenna
PTE-RB-800-2100
3dbi @746-787MHz
Ceiling Antenna PTE-CI-800-2500 3dbi @746-787MHz
Indoor Panel Antenna PTE-PN-800-2500 7dbi @746-787MHz
Outdoor Antenna
YAgi Antenna
PTE-YG-800/1900
8dbi @746-787MHz
LPDA Antenna
PTE-LO-700-2500
9dbi @746-787MHz
Omni directional
glass fiber Antenna
PTE-GF-700-2500
3dbi @746-787MHz
Indoor Cable
20
feet 3D-FB Coaxial
cable with N male
connector
PTE-3D-FB-5NB
2.19db @746-787MHz