Installation Instructions

ManualsBrandsShelterLogic ManualsCarportsMaxAP 10 ft. x 20 ft. Canopy

05_29522_0APage 1

10' x 20'

MAX AP CANOPY

Assembly Instructions

DESCRIPTION MODEL #

10' x 20' MAX AP Canopy - 8 Leg - Tan

29522

Before you start: 2+ individual recommended for assembly, approximate time 2 hr.

Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored.

THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE.

150 Callender Road

Watertown, CT 06795

www.shelterlogic.com

1-800-524-9970

1-800-559-6175

Canada:

RECOMMENDED TOOLS

1/19/11

Summary of content (5 pages)

PAGE 1
0' x 20' MAX AP CANOPY Assembly Instructions Description 10' x 20' MAX AP Canopy - 8 Leg - Tan Model # 29522 Recommended Tools Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored. THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE. Before you start: 2+ individual recommended for assembly, approximate time 2 hr. 1-800-524-9970 150 Callender Road Watertown, CT 06795 www.shelterlogic.
PAGE 2
ATTENTION: This shelter product is manufactured with quality materials. It is designed to fit the ShelterLogic®, LLC custom fabric cover included. ShelterLogic®, LLC Shelters offer storage and protection from damage caused by sun, light rain, tree sap and animal - bird excrement. Please anchor this ShelterLogic®, LLC structure properly. See manual for more anchoring details. Proper anchoring, keeping cover tight and free of snow and debris is the responsibility of the consumer.
PAGE 3
10' x 20' MAX AP Canopy - 8 Leg - Parts List - Model #29522 Quantity Part # Rafter Poles, Swedge 24.4" 8 802204 Poles, Swedge 40.7" 25 802203 Cross Poles 39.5" 9 802207 Leg Poles 39" 8 802205 3 - Way Frame Connectors 6 802201 4 - Way Frame Connectors 6 802202 Bungee Cords 24 10066 Canopy Cover 1 802172 Base Feet 8 10075 Anchors 8 10431 Description of Parts: 1.
PAGE 4
2. ASSEMBLE ROOF FRAME Swedged Tubes Connections NOTE: Swedged tubes insert into plain ends at the crimp marks. 802203 802204 Crimp Marks Leg Pole Assembly 3. Assemble Legs & Attach to Roof Frame A. Attach all legs to one side first. Let the other side of roof frame rest on the ground. Repeat for opposite side. 802205 802203 10075 4. Anchor the Frame There are four holes on each base foot that the anchor can go into. A. Select a hole in each base foot.
PAGE 5
. Place Cover and secure to CANOPY Frame A. Place cover over assembled roof frame with grommet panels facing down, aligned with cross rails. B. Make sure the cover is properly aligned on the frame, secure the four corners of the cover with bungees (10066) to the frame first. Attach remaining bungees. Re-adjust bungees position along cross pole as needed to ensure a tight and even fit of the cover to the frame.