Instructions / Assembly

ManualsBrandsShelterLogic ManualsStorage & Organization12 ft. x 20 ft. x 11 ft. Grey Cover Barn Shelter

1

2

3

4

5

Page 2

05-301123-0C 04/21/09

12'W x 9'H Barn Style Frame Assembly

www.shelterlogic.com

150 Callender Road

Watertown, CT 06795

ATTENTION:

FOR MISSING OR

REPLACEMENT PARTS

OR QUESTIONS,

PLEASE CONTACT

CUSTOMER SERVICE:

1.800.524.9970

CANADA 1.800.559.6175

Layout out frame parts as shown and match up items with quantity

to make sure no parts are missing.

End Rib

End Rib

Middle Ribs

Please read and understand instructions

completely before assembly.

Cover Rails

Side

Rails

301123 PACKING LIST BOX 1 OF 2

Part # Description Qty.

800172 141° 4-way Side connectors 8

800169 4-way Top connectors 4

800165 156° 3-way Side connectors 4

800166 141° 3-way Side connectors 4

12188 Rafter Poles 29 1/8" 10

12190 Middle Poles - Swedged 43 3/8" 8

12191 Cross Rails 45 1/2" 19

800110 Middle Poles - Swedged 19 7/8" 4

10022 4-way cover rail clamp 16

10023 3-way cover rail clamp 8

10017 Bolts 1/4"*L2 1/2" 84

1013 Bolts 1/4"*L2" 70

1010 Nuts 1/4" 154

1011 Gasket 1/4" 1/4" 20

Part # Description Qty.

800172 141° 4-way Side connectors 8

800169 4-way Top connectors 4

800165 156° 3-way Side connectors 4

800166 141° 3-way Side connectors 4

12188 Rafter Poles 29 1/8" 10

12190 Middle Poles - Swedged 43 3/8" 8

12191 Cross Rails 45 1/2" 19

800110 Middle Poles - Swedged 19 7/8" 4

10022 4-way cover rail clamp 16

10023 3-way cover rail clamp 8

10017 Bolts 1/4"*L2 1/2" 84

1013 Bolts 1/4"*L2" 70

1010 Nuts 1/4" 154

301123 PACKING LIST BOX 2 OF 2

Summary of content (6 pages)

PAGE 1
2'W x 9'H Barn Style Frame Assembly Please read and understand instructions completely before assembly. Layout out frame parts as shown and match up items with quantity to make sure no parts are missing. End Rib Middle Ribs End Rib Side Rails Cover Rails 301123 PACKING LIST BOX 1 OF 2 301123 PACKING LIST BOX 2 OF 2 Part # Description Qty. Part # Description Qty.
PAGE 2
Basic Frame Assembly 800170 800165 STEP 1: ASSEMBLE END RIBS Fig. 1 12188 12188 800165 12188 12188 800166 Fit together roof rib using the following parts: (1) #800170 3-Way Top Connectors (4) #12188 Rafter Poles (2) #800165 3-Way Side Connectors (2) #800166 3-Way Side ConnectorsUsing (8) #10017 1/4" x 2 1/2" Bolts and (8) Nuts securely fasten these tube. Fig. 1 800166 Use #10017 1/4" x 2 1/2" Bolts 2 End Ribs Fig.1 800169 STEP 2: ASSEMBLE MIDDLE RIBS Fig.
PAGE 3
STEP 5: INSTALL COVER RAIL Fig. 5, Fig. 6 1013 clamps 10022 1011 Attach the #12191 cross rails using the 3-Way and 4-Way cover rail clamps ar-ound the uprights and losely fasten with 1/4" x 2" Bolts and Nuts. Check the rails are evenly spaced above the ground on both sides. Push down on the connect-ors one at a time to tension the cover and tighten the bolts to hold tightly. Fig. 5 & Fig. 6. 1010 middle leg 1013 clamps 10023 1011 1010 Fig.6 corner leg Fig.5 STEP 6: ATTACH & SECURE BASE FEET Fig.
PAGE 4
STEP 9: INSTALLING THE COVER ON THE FRAME: Fig. 12A, 12B, 12C & 12D 1. Lay the cover on the ground next to the frame with the inside of the cover (the side with the pipe pockets) facing down and the webbing on the front and rear of the corner of the building. Position the cover so that it is centered on the frame, front to back. Fig 12A 2. Fold over the side closest to the frame so the pipe pocket is now accessible.
PAGE 5
Outside Corner View STEP 10: SECURE YOUR COVER: Fig. 13A, 13B, 14 & 15 Pull the cover over the frame so the webbing is at the front and rear of the frame and the internal pipe pocket runs along the bottom of the frame. Use the (4) ratchets as shown in Fig. 13A. Adjust the cover so there is equal overhand on the front and rear. WIth the webbing and ratchets, pull the cover snug but not tight.
PAGE 6
WARNINGS, CAUTIONS, CARE & CLEANING WARNING Prior to installation, consult with all local and municipal codes regarding the installation of temporary shelters. Choose the location of your shelter carefully. Check for overhead utility lines, tree branches or other structures. • Do NOT install near roof lines or other structures that could shed snow, ice, or excessive run-off onto your shelter. • Do NOT install too close to other structures. A MINIMUM of 6 to 10 ft.