Installation Guide

05_GP-AA-XXXXXXA-028XXX20_H1Page 5

A. Place assembled rst end rib in the staked area. Place the ShelterLocks

(800372) on the uprights

as shown in Figure 4. From the outside of the rib insert the bolt through the upright and then through the

ShelterLock

B. Place the rst Side Rails (11104) over the

bolts and nest them into the ShelterLocks

. Install

the nut onto the bolt and HAND TIGHTEN THE

BOLT THAT CONNECTS TO THE END RIB.

NOTE: Sliding Cover Rails (11105) should be

attached to frame after Step 8, once cover is

placed over the frame. See Step 9.

3. ASSEMBLE MIDDLE RIBS

Assemble middle ribs as shown in Fig. 3. Securely

fasten all of the joints with the hardware indicated.

800384

800385

800386

800436

800386

800436

800383

800389800390

800391

800088 800088

800088

800436

00690

11131

Use #11131

5/16" x 2 3/4" L

Bolts

4. INSTALL SIDE RAILS AND SHELTERLOCK

STABILIZERS

Fig.3

Fig.4

800438

11104

800372

00690

800454