Installation Guide

Page 7 05_GP-AA-XXXXXXA-028XXX16_G1

7. INSTALL TOP RAIL:

As with the Side Cross Rails, Use #11104 and #11102 Rails to make the Top Cross Rail:

A. Place the rst rail (#11104) under the end rib and secure it with bolt #11134 as shown in

Fig.7A. HAND-

TIGHTEN this bolt.

B. Connect the rails to each other, laying the #11102 cross rails over the middle ribs. Use bolt #11133.

Fig.7B

C. Place the last rail under the rear end rib. HAND-TIGHTEN this bolt.

Fig.7B

11134

00690

Fig.7A

11102

11104

00690

11133

11102

8. SQUARING UP THE FRAME

A. Be sure the frame is in its nal location, which

needs to be as at and level as possible.

B. Measure across opposite corners.

These distances must be equal to within 1 inch.

C. Check that the front and rear of the frame

measures 30 feet in width.

Fig.8

800383

28 ft.