Installation Guide

Page 5 05_GP-AA-XXXXXXA-028XXX16_G1

A. Place assembled rst end rib in the staked area. Place the ShelterLocks

(800372) on the uprights

as shown in Figure 4. From the outside of the rib insert the bolt through the upright and then through the

ShelterLock

B. Place the rst Side Rails (11104) over the

bolts and nest them into the ShelterLocks

Install the nut onto the bolt and HAND

TIGHTEN THE BOLT THAT CONNECTS TO

THE END RIB.

NOTE: Sliding Cover Rails (11105) should be

attached to frame after Step 8, once cover is

placed over the frame. See Step 9.

3. ASSEMBLE MIDDLE RIBS

Assemble middle ribs as shown in Fig. 3. Securely

fasten all of the joints with the hardware indicated.

800384

800385

800386

800436

800386

800436

800383

800389800390

800391

800859 800859

800859

800387

00690

11131

Use #11131

5/16" x 2 3/4" L

Bolts

4. INSTALL SIDE RAILS AND SHELTERLOCK

STABILIZERS:

11104

800372

00690

800454

Fig.3

Fig.4