Installation Guide

Page 11 05_GP-AA-XXXXXXA-028XXX16_G1

11. INSTALLING THE COVER ON THE FRAME - continued

E. After cover is centered on frame, insert a Cover Rail (#11105) into each pocket on the inside of the cover in

the roof.

F. Use 3-Way (#11106) and 4-Way (#11107) Clamps to connect them to the ribs. Hand-tighten bolts (#11130).

See Figure 11F.

NOTE: To avoid damage to fabric, face bolt heads towards cover.

G. Using cover rails, pull top portion of cover tightly downward and outward from the

center and tighten bolts.

11130

11106

00690

11130

11107

00690

Middle Rib Cross Rail ClampsEnd Rib Cross Rail Clamps

1110 5

COVER NOT

SHOWN FOR

CLARITY.

Fig.11F