Full Product Manual

Page 4 05_GP-AA-XXXXXXA-022XXX13_H0
NOTE: FRAME EXTENSION KIT
Your model may have more middle ribs than shown in the illustration on page 3. You will receive one extra
rib for every extra 4 ft. of building length that you purchase. The basic frame assembly will remain the
same. The cover will be the correct size for the length of the building.
A
B
BUILDING
LENGTH
22 ft.
WIDTH
Fig.1
1. PLOTTING THE FRAME:
Before building your shelter, you should choose a at area on
your property and plot your shelter.
A. Stake out the area for the shelter in the desired spot. The width of
the area should be at least equal to the width of the shelter and the
length should be equal to the length of the shelter Fig. 1.
B. Measure diagonally from corner to corner (A & B). These
measurements should be the same. If they are not equal the stakes
need to be adjusted until the width, length and inside measurements
are correct.
2. ASSEMBLE TRUSSES
Assemble all of the trusses as shown. Securely
fasten the joints with the hardware indicated.
800403800402
00682
00690
3. ASSEMBLE END RIBS
Assemble end ribs as shown in Fig. 2. Securely fasten all of the joints with #11131
(2-3/4") Bolts and Nuts.
11016 11016
11013
11013
0455104551
800402 800403
11068
11068
1106811131
00690
11068 11068
11068
11136
Fig.2