Full Product Manual

Page 10 05_GP-AA-XXXXXXA-022XXX13_H0

COVER RAILS

11105

13. INSTALLING COVER AND COVER RAILS

CORRECT

Webbing and Ratchets Securing Cover

FRONT

REAR

End Rib Cross Rail Clamps

11130

11105

11106

00690

INCORRECT

Middle Rib Cross Rail Clamps

11130

11105

11107

00690

Fig. 12

A. Make sure cover is centered on frame. There should be an equal amount of overhang at all four corners.

B. Insert the “S”- Hook on ratchet into hole on the leg bend. Insert the webbing into the spindle of the ratchet

and pull tight. Wind the ratchet so that the webbing overlaps itself.

C. Disassemble cover rails and slide through fabric pockets at each leg and reattach with clamps to each leg.

Repeat this on other side. Push down on cover rails to tighten cover, before tightening bolts completely.

D. Check and tighten Ratchets and Cover Rails monthly to ensure the cover is tight.

NOTE: The ShelterLogic

logo should

be oriented as shown below.