Installation Guide

Page 5 05_GP-AA-XXXXXXA-015XXX12_C1
6. CONNECT THE BACK END RIB
The Cross Rails for the last rib will have two plain ends (11104).
Take the wind brace and attach it between the end rib and the last middle rib as shown in Fig. 6.
5. CONNECT THE FRONT END RIB TO THE MIDDLE RIBS
A. With help, move the front end rib into the desired staked area.
B. Place the ShelterLock
®
(800372) on the upright as shown in Fig. 5.
C. From the outside of the rib insert the bolt through the upright and then through the ShelterLock
®
.
D. Place the plain end of a Cross Rail (11102) over the bolt and nest it into the ShelterLock
®
.
Repeat steps A-D for the each of the middle ribs.
E. Place the wind brace over the Cross Rail. Install the nut onto the bolt and tighten.
Fig.5
11102
Wind
Brace
Rib
11131
00690
Middle Rib ShelterLock
®
Assembly
End Rib ShelterLock
®
Assembly
800454
800372
00690
11150
11102
11134
00690
11150
Rib
11102
800372
Wind
Brace
Fig. 6
11134
00690
11150
Back Rib
11104
800372
Wind
Brace
11104