Product Manual

05_10169_0APage 3
1. PLACE COVER OVER ROOF FRAME
Lay the cover over the roof frame with the portion with the grommets facing down. The valance will cover
the frame eaves.
2. SECURE CANOPY COVER
Working from the inside, slide the bungee
fasteners (10066) through the grommets.
3. TIGHTEN THE COVER WITH
TWIST TITE
A. Wrap the cord with plastic ball and "S" hook at the
corners of the cover around the corner leg poles.
Insert "S" hook into the hole of the corner leg poles.
Twist each leg pole until the cover becomes tight.
Twist the leg poles equally to ensure the cover stays
aligned during tightening.
B. Secure the leg poles with the Twist-Tite™ Set.
(10056) Wrap the bungee around the side frame
connection
(10045) and insert "S" hook into the leg
pole hole that lines up with the corner side frame
connector hole.
Twist-Tite™ Secure Leg Pole
802109
10159
10045
10056
Twist-Tite
Tighten Cover
802109
10159
10045
BUNGEE-BALL
AND CORD
HIDDEN UNDER
VALANCE
INSIDE VIEW
OF COVER
OUTSIDE VIEW
OF COVER