Product Manual

ManualsBrandsShelterLogic ManualsCanopies + Pop-Up Canopies30ft. x 18ft. Replacement Canopy Top, White

05_10169_0APage 1

150 Callender Road

Watertown, CT 06795

www.shelterlogic.com

1-800-524-9970

1-800-559-6175

Canada:

18' x 30'

SUPER MAX CANOPY

Replacement Cover Instructions

Cover Only --

Frame Not Included

DESCRIPTION MODEL #

18' x 30' SUPER MAX - Replacement Cover for 2" dia. frame - White

10169

Before you start: 2+ individual recommended for assembly, approximate time 20 minutes.

Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored.

THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE.

RECOMMENDED TOOLS

Summary of content (4 pages)

PAGE 1
8' x 30' SUPER MAX CANOPY Replacement Cover Instructions Cover Only -Frame Not Included Description 18' x 30' SUPER MAX - Replacement Cover for 2" dia. frame - White Model # 10169 Recommended Tools Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored. THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE. Before you start: 2+ individual recommended for assembly, approximate time 20 minutes.
PAGE 2
ATTENTION: This shelter product is manufactured with quality materials. It is designed to fit the ShelterLogic®, LLC custom fabric cover included. ShelterLogic®, LLC Shelters offer storage and protection from damage caused by sun, light rain, tree sap and animal - bird excrement. Please anchor this ShelterLogic®, LLC structure properly. See manual for more anchoring details. Proper anchoring, keeping cover tight and free of snow and debris is the responsibility of the consumer.
PAGE 3
1. PLACE COVER OVER Roof Frame Lay the cover over the roof frame with the portion with the grommets facing down. The valance will cover the frame eaves. 2. SECURE CANOPY COVER Working from the inside, slide the bungee fasteners (10066) through the grommets. INSIDE VIEW OF COVER OUTSIDE VIEW OF COVER Bungee-Ball and cord hidden under valAnce Twist-Tite™ Tighten Cover 3. Tighten the Cover with Twist Tite™ A.
PAGE 4
1. Placer lA COUVERTURE : Placer le toit sur le cadre pour que la partie avec les œillets soit tournée vers le bas. La couverture couvre les avancées du cadre. 2. FIXEZ LA COUVERTURE En travaillant de l'intérieur, glissez les sandows (10066) daus les trous. Intérieur, vue de dessous du toit. Vue du toit de l’extérieur Boule du sandow et cordon cachés sous la cantonnière. 3. Serrez la couverture avec Twist Tite™ Twist-Tite™ Serrez la Couverture A.