Owner manual

ManualsBrandsShelterLogic ManualsCar29522 10 x 20 Max AP Canopy

05_29522_0BPage 1

150 Callender Road

Watertown, CT 06795

www.shelterlogic.com

1-800-524-9970

1-800-559-6175

Canada:

1/19/12

DESCRIPTION MODEL #

MaxAP

™

10' x 20' Canopy - 8 Leg - Sandstone

29522

Before you start: 2 or more individuals recommended for assembly, approximate time 2 hour.

Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored.

THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE.

RECOMMENDED TOOLS

10' x 20'

MaxAP

™

Canopy

Assembly Instructions

Summary of content (5 pages)

PAGE 1
0' x 20' MaxAP™ Canopy Assembly Instructions Description MaxAP™ 10' x 20' Canopy - 8 Leg - Sandstone Model # 29522 Recommended Tools Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored. THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE. Before you start: 2 or more individuals recommended for assembly, approximate time 2 hour. 1-800-524-9970 150 Callender Road Watertown, CT 06795 www.shelterlogic.
PAGE 2
ATTENTION: This shelter product is manufactured with quality materials. It is designed to fit the ShelterLogic® Corp. custom fabric cover included. ShelterLogic® Corp. Shelters offer storage and protection from damage caused by sun, light rain, tree sap and animal - bird excrement. Please anchor this ShelterLogic® Corp. structure properly. See manual for more anchoring details. Proper anchoring, keeping cover tight and free of snow and debris is the responsibility of the consumer.
PAGE 3
MaxAP™ 10' x 20' Canopy - Parts List - Model #29522 Quantity Description of Parts: 24 3/8 in. / 61,9 cm Part # 8 802204 25 802203 9 802207 39 in. / 99 cm 8 802205 3 - Way Frame Connectors 6 802201 4 - Way Frame Connectors 6 802202 Bungee Cords 24 10066 Cover 1 803072 Base Feet 8 802916 Temporary Spike Anchors 8 10431 Rafter Poles 40 11/16 in. / 103,3 cm Cross Rails 39 1/2 in. / 100,3 cm Cross Rails Leg Poles 1.
PAGE 4
2. ASSEMBLE ROOF FRAME NOTE: Swedged tubes insert into plain ends at the crimp marks. Swedged Tubes Connections 802203 802204 Crimp Marks Leg Pole Assembly 3. Assemble Legs & Attach to Roof Frame A. Attach all legs to one side first. Let the other side of roof frame rest on the ground. Repeat for opposite side. 802205 802203 802916 4. Anchor the Frame There are four holes on each base foot that the anchor can go into. A. Select a hole in each base foot.
PAGE 5
. Place Cover and secure to CANOPY Frame A. Place cover over assembled roof frame with grommet panels facing down, aligned with cross rails. B. Make sure the cover is properly aligned on the frame, secure the four corners of the cover with bungees (10066) to the frame first. Attach remaining bungees. Re-adjust bungees position along cross pole as needed to ensure a tight and even fit of the cover to the frame.