The Cano Factor ShelterLogic Model #25793 10' x 10' Celebration Canopy Qty. Description Part # Rafter Tube 44.6" 8 10386 Rafter Tube 44.6" 8 10387 Cross Rails 31.7" 4 10390 Upright Tube 42.4" 4 10391 4 10392 4-Way Top Connectors 1 10585 3-Way Top Connectors 4 10385 Upright Tube 42.4" Cover 1 10393 Pins w/rings 4 10052 Base Feet 4 10050 Anchors 8 10431 Installation Instructions Please read instructions COMPLETELY before assembly.
Frame Assembly Overview 10585 10387 10386 10385 10386 10390 10387 10391 10392 CARE & CLEANING INFORMATION DO NOT DO NOT expose top or walls to open fire or flame. DO NOT use barbeque grills or smokers underneath canopy. use harsh abrasives, bleach or cleansers. Cover and walls can be easily cleaned with mild soap and water. Periodically check stakes or anchors to ensure stability of unit, especially following exposure to high winds or heavy rain.
1. Frame Assembly 10385 10386 10390 10387 The part number is stamped on each part. 10386 Assembly rafter tube 10386 to rafter tube 10387, the connector pins should be facing out, there should be four assembled tubes when complete. Depress the assembly buttons at the end of each tube and assemble the four assembled tubes into top connector 10585, be sure the buttons click into the holes in the connector.
3. Securing Cover Unpackaged the cover and place the bright blue side facing up over the assemble canopy frame. Once the cover is placed over the frame to secure the cover pick up the corner of the cover to expose the elastic and metal hold down clips. Secure the metal clips to the into the upright tubes holes see figure 4. Once the cover has been attached in all four corners attach the bungee to the tube see figure 5. Fig. 4 Fig. 3 Fig. 5 4. Base Feet 5.
