Owners manual

10' x 20'

1-3/8" Canopy Enclosure Kit Installation

Model 25775 and 30775

Step 1

Step 2

Please read instructions carefully before beginning.

For assembly questions or replacement parts,

please call customer support: 1-800-524-9970

Pictures for referrence only.

Please identify each part carefully.

05-25775-0B

05-30775-0B

7/17/2007

800.524.9970

www.shelterlogic.com

WARNING!

Use CAUTION when assembling this unit. Manufacturer requires the

use of safety goggles during assembly. Bungees are under extreme

tension and may snap out of your hand and cause injury. Be aware

of poles over your head during assembly that may not be secured,

and could fall and cause injury. Do not assemble near electrical over

head wires. Two or more persons are recommended to

assemble this shelter.

Description Qty. Part #

Side wall panels 2 10082

Solid back panel 1 10085

Double zipper door 1 10086

Bungees 80 10066

Recommended Tools

Step Ladder

Safety Glasses

For safety reason

never use the top

step of the ladder.

Loosen the rope

You will need to rotate corner poles in order to

loosen the rope. Turnng direction may be

different depending on pole.

Walls attach to unit by bungee cords. Hang wall

form cross rails and wrap bungee cords around

cross poles. Thread bungee cord through

grommet in side wall and around leg. If install-

ing more than one wall, attach all the walls at

the top first, then work your way around unit

warpping the bungee cord through both corners

of the walls and legs.