Product Manual

7. ATTACHING

FEET

& SECURING BASE

wistTightª

6.2

To get your cover to fit

snugly over the frame, "twist"

each corner leg pole equally

until the cover becomes very

tight. (picture A). Make sure

to line up the hole in the top

of the leg with the hole in the

corner side bends.

6.3

TPicture B o keep the leg

in place, wrap the bungee cord

around the cross rail, insert

S hook into lined up hole of

leg pole and 3 way connec-

tor. This will prevent the leg

from "un twisting". Do this for

each corner.

Insert Base Feet Plates onto

bottom of legs, be sure to line

up the pre-drilled hole in the leg

with the pre-drilled hole in the

base foot. Insert PIN all the way

through leg and foot, to other

side, secure with ring.

8. ANCHORING

Locate a suitable location to place one anchors

as shown in the illustration into each of the base

feet until the round end of the anchor touches the

base feet.

PAGE 3