Technical data

PV
OFF GRID
PV
OFF GRID
215
410
124
XPC 2200-24
84
142
170
58|
Steca Elektronik GmbH | 87700 Memmingen | Germany | Fon +49 (0) 8331 8558-0 | Fax +49 (0) 8331 8558-132 | www.stecasolar.com
|59
Steca Elektronik GmbH | 87700 Memmingen | Germany | Fon +49 (0) 8331 8558-0 | Fax +49 (0) 8331 8558-132 | www.stecasolar.com
Steca XPC
1400-12, 2200-24, 2200-48
The Steca XPC series of inverters feature a very high over-
load capacity that even enables them to operate highly
critical loads. Other important features of these high-
quality inverters are their powerful device protection and
their individual low own consumption. The XPCs combine
a sine wave inverter, 4-stage battery charger and transfer
system in one device, therefore making them particularly
suitable for hybrid systems. The built-in multifunctional
contact enables you, for example, to switch on and off
diversion loads for excess power or start a diesel genera-
tor to recharge batteries.
Features
Power range 1,400 - 2,200 W
Adjustable battery charger included
Excellent overload capabilities
Adjustable, automatic load detection
Usable as back-up or UPS
Best reliability
Multifunction switch
Electronic Protections
Battery deep discharge protection
Battery over voltage shut down
Over temperature and overload protection
Short circuit protection
Reverse polarity protection by
internal fuse
Acoustic warning before battery low or overheating
disconnection
Displays
Operational status inverter by 7 LED
Options
Types with 230 V / 60 Hz
Remote control RCC-01
(With this additional device it is also possible to pro-
gramme the inverter parameters.)
Protection cover C-IP 23 to enhance the protection
class
Terminal protection cover CFC-01 to avoid hazardous
contacts with strain relief clamps
Temperature sensor CT35 to correct the operation
voltages according to the actual battery temperature
6720 WCOMSHS VPS RV HYBRID UPS
DC
AC
Power class
1,400 - 2,200 W
0 W 1,000 W 5,000 W 10,000 W500 W
Inverter-Charger XPC 1400-12 2200-24 2200-48
Nominal input voltage 12 V 24 V 48 V
Input voltage range 9.5 - 16 V 19 - 32 V 38 - 64 V
Output voltage 230 V~ +0 / -10 % (pure sine wave)
Output frequency 50 Hz +/-0.05 %
Continuous power 1 100 VA 1 600 VA 1 600 VA
Max. power 30 min. 1 400 VA 2 200 VA 2 200 VA
Max. power 5 sec. 3 300 VA 4 800 VA 4 800 VA
Max. efficency 94 % 95 % 95 %
Consumption standby 0.6 W 0.9 W 1.3 W
Load detection (standby) adjustable: 1 - 25 W
Charging current, adjustable 0 - 45 A 0 - 37 A 0 - 20 A
Min. input voltage adjustable from 150 to 230 VAC
Battery monitoring LVD, HVD, floating and equalisation voltage
adjustable by user via optional remote
control RCC-01
Max. current / power on transfer system 16 A / 3.7 kVA
Switching time < 20 ms
Cable length battery 165 cm
Operating temperature -20 °C to +55 °C
Protection class IP 20 / with optional top cover: IP 23
Weight 11.7 kg 12.6 kg
Dimensions l x w x h 410 x 215 x 124 mm
Technical data at 25 °C / 77 °F
Sine
Wave Inverter
AJ 275-12
Steca AJ
275-12, 350-24, 400-48,
500-12, 600-24, 700-48,
1000-12, 1300-24,
2100-12, 2400-24
A particular feature of the AJ inverter series is its wide
range of available power classes and DC input voltages,
enabling the optimal inverter to be used for any applica-
tion. The cables for the battery and load connection are
already pre-mounted on the AJ, thus making it easier to
connect the device. The automatic standby mode consi-
derably reduces the inverter’s own consumption. The AJ
inverter’s excellent overload capacity ensures that even
critical loads can be operated easily.
Features
Power range 275 - 2,400 W
Suitable for all AC loads
Excellent overload capabilities
Adjustable, automatic load detection
Best reliability
Electronic Protections
Battery deep discharge protection
Battery over voltage shut down
Over temperature and over load protection
Short circuit protection
Reverse polarity protection by internal fuse
(except than AJ2100-12)
Acoustic warning before battery low or
overheating disconnection
Displays
Operational status inverter by LED
Options
Types with 115 V / 50 Hz, 115 V / 60 Hz
or 230 V / 60 Hz
Terminal for connecting of a remote control
(On / Off) for the types AJ275-12 to AJ700-48
Remote Control JT8 (On / Off, LED) for AJ1000-12
to AJ2400-24
Power class
275 - 2,400 W
0 W 1,000 W 5,000 W 10,000 W500 W
Inverter AJ 275-12 350-24 400-48 500-12 600-24 700-48 1000-12 1300-24 2100-12 2400-24
Nominal input voltage 12 V 24 V 48 V 12 V 24 V 48 V 12 V 24 V 12 V 24 V
Input voltage range 10.5 - 16 V 21 - 32 V 42 - 64 V 10.5 - 16 V 21 - 32 V 42 - 64 V 10.5 - 16 V 21 - 32 V 10.5 - 16 V 21 - 32 V
Output voltage 230 V~ +0 / -10 % (true sine wave)
Output frequency 50 Hz +/-0.05 %
Continuous power 200 VA 300 VA 300 VA 400 VA 500 VA 500 VA 800 VA 1000 VA 2000 VA 2000 VA
Max. power 30 min. 275 VA 350 VA 400 VA 500 VA 600 VA 700 VA 1,000 VA 1,300 VA 2,100 VA 2,400 VA
Max. power 5 sec. 450 VA 650 VA 1,000 VA 1,000 VA 1,200 VA 1,400 VA 2,200 VA 2,800 VA 5,000 VA 5,200 VA
Max. efficency 93 % 94 % 94 % 93 % 94 % 94 % 93 % 94 % 92 % 94 %
Consumption standby 0.3 W 0.3 W 0.4 W 0.3 W 0.4 W 1.0 W 0.3 W 0.4 W 0.5 W 0.4 W
Load detection (standby) 2 W adjustable: 1 - 20 W
Cable length Battery / AC 1.2 m / 1 m 1.5 m / 1 m 1.7 m / 1 m
Operating temperature -20 °C bis +50 °C
Protection class IP 30 IP 20
Weight 2.4 kg 2.6 kg 4.5 kg 8.5 kg 19 kg 18 kg
Dimensions l x w x h 170 x 142 x 84 mm 247 x 142 x 84 mm 455 x 142 x 84 mm 406 x 273 x 117 mm
Technical data at 25 °C / 77 °F
Sine
Wave Inverter
Technical data Technical data
COMSHS VPS RV