Specifications
65
Phone
800-236-0112
FAX
800-444-0331
www.tapconet.com
Virtually
Unbreakable Gate Arm
Replacing broken wood and
aluminum gate arms can result
in lost revenue, especially in
single lanes where closure is not
an option. TAPCO's gate arm
addresses the problem at the
source with our unbreakable
gate arm. The arm features a
single-piece "T" cross-section
design with reinforcing support
ribs incorporated along
each edge, which provide
warning decal protection
and structural rigidity. It is
constructed of a durable, UV
resistant, continuous glass
fiber and resin reinforced,
thermosetting composite
material which is resistant
to impact, ozone and
hydrocarbons. Operating
temperature range of
-40°F
to +140°F.
Fits Federal APD, Amano,
DoorKing
®
gate operators,
call for other models
Gate arm, 10' white, fiber/resin composite, warning sign decal
223-00040
$42.50
20" x 3 ½" gate arm warning sign decal
373-00208
$5.65
Manually Operated Rising Barrier
Developed for use in locations that require barriers up to 18 feet in
length but do not have any provisions for electrical supply. The MG19
utilizes cast iron counterweights to balance the gate to the point where
it can be easily opened with one hand. Locking rings may be fitted with
pad or combination locks to secure the arm in either the raised or closed
position.
Net weight of 19' arm barrier is 321 lb.
Vertical posts made of tubular steel with bracket for mounting
Barrier arm made of round tubular aluminum
White arm with red reflecting stripes on both sides
Pivot assembly made of flat steel profiles, mounted on steel rotating
shaft with arm fixing brackets
Sliding cast iron counterweights for
adjustable arm balancing
Padlock fixing points for locking arm
in closed or open position
Tip support for arm length of 5.01 m
(16 Feet)
19' arm manually operated rising barrier
108519
$2,135
10' arm manually operated rising barrier
108522
$1,950
Single Lane Gate Operator, Unbreakable Gate Arm, Manual Barrier
1601 Parking Gate Operator
The 1601 operator is designed for single lane (14 ft. max) vehicular traffic
control in high traffic commercial and industrial applications. The 1601
operator is designed so that it can be mounted on either the left or right
hand side of the roadway.
Advanced features
Magnetic limit control
Ports for plug-in loop detectors
Automatic sequencing inputs
for use with slide and swing gate
operators
Up input memory buffer
Down memory option
Multiple up commands
Two convenience outlets
360° gear box rotation
Gate tracker reporting output
Programming switches
Left or right hand mount
Specifications
½ HP continuous-duty motor
40:1 gear-box running in a
continuous oil bath
1½ seconds open time
Dimensions (operator only):
15 ¼"W x 39 ½"H x 14 ¾"D
Class II, III and IV applications
Compliant with UL 325 and 991.
ETL Listed. To be compliant
with UL 325 and industry safety
guidelines, additional secondary
entrapment prevention devices
may need to be installed with
this gate operator
.
1601 parking barrier gate, ½ HP, 115 V
6565123
$2,755
14 ft. wooden arm for 1601 parking barrier gate, (requires 6565125)
6565124
$155
Wood arm hardware kit, necessary to mount wooden arm (6565124) to 1601
6565125
$115
12 ft. plastic arm for 1601 parking barrier gate, (requires 6565127)
6565126
$90
Plastic arm hardware kit, necessary to mount wooden arm (6565126) to 1601
6565127
$115
14 ft. aluminum arm for 1601 parking barrier gate, (requires 6565129)
6565128
$211
Aluminum arm hardware kit, necessary to mount wooden arm (6565128)
6565129
$145
6565123
Shown here on Federal APD
gate operator (sold separately)
Try doing this with a wood
or aluminum gate arm!
Aluminum arm and
aluminum hardware kit 6565129
Cross section shows three support ribs
373-00208